Equivalence assessment of creams with quali-quantitative differences in light of the EMA and FDA regulatory framework.

EMA and FDA are upgrading guidelines on assessing the quality and the equivalence of topically applied drug products for developing copies of originator products and supporting post-marketing variations. For topical products having remarkably similar composition, both EMA and FDA accept the equivalence on the bases of the comparison of rheological properties and in vitro drug release constant (k) and skin permeation flux (J) values, instead of clinical studies. This work aims to evaluate the feasibility to expand this approach to variations of the composition of complex semi-solid preparations. Ibuprofen (IB) creams at two different strengths (i.e., 1 % and 10 %) were used as a model formulation. Two formulative changes were performed: (a) the addition of the humectant to simulate a minor post-marketing variation; (b) the substitution of the emulsifying system to simulate a major one. These variations impacted only in 1 % IB formulations where both the equivalences of rheological data and J-values failed. At the highest concentration, the presence of IB crystals broke down the differences in rheological patterns and lead the IB thermodynamic activity at the maximum figuring out an overlapping of the J-values. Such data suggest the combination of these studies, which are thought mainly for the development of copies, could be also applied to the management of post-marketing variations that involve product composition.

Feeding Next-Generation Nanomedicines to Europe: Regulatory and Quality Challenges.

New and innovative nanomedicines have been developed and marketed over the past half-century, revolutionizing the prognosis of many human diseases. Although a univocal regulatory definition is not yet available worldwide, the term "nanomedicines" generally identifies medicinal products that use nanotechnology in their design or production. Due to the intrinsic high structural complexity of these products, the scientific and regulatory communities are reflecting on how to revise the regulatory framework to provide a more appropriate benefit/risk balance to authorize them on the market, considering the impact of their peculiar physicochemical features in the evaluation of efficacy and safety patterns. Herein, a critical perspective is provided on the current open issues regarding regulatory qualification and physicochemical characterization of nanosystems considering the current European regulatory framework on nanomedicine products. Practicable paths for improving their quality assurance and predicting their fate in vivo are also argued. Strengthening the multilevel alliance among academic institutions, industrial stakeholders, and regulatory authorities seems strategic to support innovation by standard approaches (e.g., qualification, characterization, risk assessment), and to expand current knowledge, also benefiting from the new opportunities offered by artificial intelligence and digitization in predictive modelling of the impact of nanomedicine characteristics on their fate in vivo.

Nature of the Interaction of Alpha-D-Mannose and Escherichia coli Bacteria, and Implications for its Regulatory Classification. A Delphi Panel European Consensus Based on Chemistry and Legal Evidence.

The nature of alpha-D-mannose-natural aldohexose sugar, C-2 glucose epimer, whose intended use is for preventing urinary tract infections-in the interaction with E. coli is addressed in order to drive the issue of its regulatory classification as a medicinal product or medical device. PRISMA systematic review approach was applied; Delphi Panel method was used to target consensus on statements retrieved from evidence. Based on regulatory definitions and research evidence, the mechanism of D-mannose does not involve a metabolic or immunological action while there is uncertainty regarding the pharmacological action. Specific interaction between the product and the bacteria within the body occurs, but its nature is inert: it does not induce a direct response activating or inhibiting body processes. Moreover, the action of D-mannose takes place, even if inside the bladder, outside the epithelium on bacteria that have not yet invaded the urothelial tissue. Therefore, its mechanism of action is not directed to host structures but to structures (bacteria) external to the host's tissues. On the basis of current regulation, the uncertainty as regard a pharmacological action of alpha-D-mannose makes possible its medical device classification: new regulations and legal judgments can add further considerations. From a pharmacological perspective, research is driven versus synthetic mannosides: no further considerations are expected on alpha-D-mannose.

Marketing authorisations for unmet medical needs: A critical appraisal of regulatory pathways in the European Union.

For unmet medical needs, the European Union has established fast-track regulatory pathways for ensuring patients' access to essential treatments. It is the case of the Conditional Marketing Authorisation (CMA) and the Authorisation under "Exceptional Circumstances" (EXC), which can be granted even if the clinical part of a medicinal product's dossier is not yet complete. The article aims to discuss the peculiarity of such regulatory pathways and assess the impact of their application on products' market access and penetration. A review of the regulatory history of medicines authorised with EXC or CMA has been performed on European Institutional databases (e.g., EMA portal, Union Register). Excluding vaccines, 71 CMAs and 51 EXCs were granted in the EU from 2002 and 2006, respectively, to 2022. Most CMAs have been released for the treatment of different types of tumours, while most of EXCs for alimentary tract and metabolism diseases, especially in the paediatric population, addressing unmet medical needs. Therefore, both regulatory pathways are effective for placing on the market essential medicines, preserving the initial positive benefit-risk balance. However, on average, CMAs are converted into "normal" authorisations only after a time which is significantly longer than the provided one-year renewal period, suggesting that such a regulatory pathway is still far from optimized.

Pediatricians' awareness of galenic drugs for children with special needs: a regional survey.

The prevalence of children with medical complexity is increasing, therefore drug formulations must be updated in accordance with their needs. Furthermore, a different drug formulation may be also needed for patients who require a very low dosage which is not easily reachable with those of the industrial products or for those following a ketogenic diet. Galenic (or compounded) drugs have been recently pointed out as effective in treating children. Nonetheless, their knowledge among healthcare providers is limited. We investigated how much did pediatricians know about galenic compounds by a short questionnaire administered to family and hospital pediatricians and pediatric residents in Friuli Venezia Giulia, Italy. We collected answers from 65 family pediatricians (57,5%), 39 hospital pediatricians (36,1%), and 47 pediatric residents (41,2%). Overall, both family and hospital pediatricians substantially know what is a galenic compound and the indications to its use. Of note, most of pediatricians ignore which is the legislation that allows the galenic compounds' preparation and use, and which is the correct procedure to prescribe them. Moreover, half of the hospital pediatricians and one-third of the family ones erroneously stated that galenic formulations cost more or like the industrial products, and around the 15% of both categories affirmed that galenic compounds are less safe than the commercial product. In conclusion, the use of galenic drug may significantly improve children's and caregivers' quality of life. We believe that all pediatricians should be updated on this quite new and interesting topic.

Digital Technologies Applied to Control the One-Step Process of Cannabis Olive Oil Preparations.

The reproducibility of an extemporaneous preparation is an essential condition for guaranteeing the quality, efficacy, and safety of the medicinal product. This study aimed to develop a controlled one-step process for cannabis olive oil preparations by applying digital technologies. For this purpose, the chemical profile of cannabinoid contents in oil extracts of Bedrocan, FM2, and Pedanios varieties obtained with the already in use method, proposed by the Italian Society of Compounding Pharmacists (SIFAP), was compared with two new methods, specifically the Tolotto Gear® extraction method (TGE) and the Tolotto Gear® extraction method preceded by a pre-extraction procedure (TGE-PE). HPLC analyses showed that the concentration of THC using cannabis flos with a high THC content (over 20% w/w) was always higher than 21 mg/mL for the Bedrocan variety and close to 20 mg/mL for the Pedanios variety when applying TGE, while with TGE-PE, the THC concentration was higher than 23 mg/mL for the Bedrocan variety. For the FM2 variety, the amounts of THC and CBD in the oil formulations obtained using TGE were higher than 7 mg/mL and 10 mg/mL, respectively, and for TGE-PE, the concentrations of THC and CBD were higher than 7 mg/mL and 12 mg/mL, respectively. GC-MS analyses were performed to define the terpene contents in the oil extracts. The samples of Bedrocan flos extracted with TGE-PE displayed a distinctive profile, highly rich in terpenes and devoid of oxidized volatile products. Thus, TGE and TGE-PE allowed performing a quantitative extraction of cannabinoids and increasing the total mono-di-tri terpenes and sesquiterpene concentrations. The methods were repeatable and applicable to any quantity of raw material, preserving the phytocomplex of the plant.

Is PEGylation of Drugs Associated with Hypersensitivity Reactions? An Analysis of the Italian National Spontaneous Adverse Drug Reaction Reporting System.

BACKGROUND AND OBJECTIVE: Evidence highlights the allergenic potential of PEGylated drugs because of the production of anti-polyethylene glycol immunoglobulins. We investigated the risk of hypersensitivity reactions of PEGylated drugs using the Italian spontaneous adverse drug reaction reporting system database. METHODS: We selected adverse drug reaction reports attributed to medicinal products containing PEGylated active substances and/or PEGylated liposomes from the Italian Spontaneous Reporting System in the period between its inception and March 2021. As comparators, we extracted adverse drug reaction reports of medicinal products containing the same non-PEGylated active substances and/or non-PEGylated liposomes (or compounds belonging to the same mechanistic class). A descriptive analysis of reports of hypersensitivity reactions was performed. Reporting rates and time to onset of hypersensitivity reactions were also calculated in the period between January 2009 and March 2021. As a measure of disproportionality, we calculated the reporting odds ratio. RESULTS: Overall, 3865 adverse drug reaction reports were related to PEGylated medicinal products and 11,961 to their non-PEGylated comparators. Around two-thirds of patients were female and reports mostly concerned patients aged between 46 and 64 years. The frequency of hypersensitivity reactions reporting was higher among PEGylated versus non-PEGylated medicinal products (11.7% vs 9.4%, p < 0.0001). The hypersensitivity reaction reporting rates were higher for PEGylated medicinal products versus non-PEGylated medicinal products, with reporting rate ratios that ranged from 1.4 (95% confidence interval 0.8-2.5) for pegfilgrastim versus filgrastim to 20.0 (95% confidence interval 2.8-143.5) for peginterferon alpha-2a versus interferon alpha-2a. The median time to onset of hypersensitivity reactions was 10 days (interquartile range: 0-61) for PEGylated medicinal products, and 36 days (interquartile range: 3-216) for non-PEGylated comparators. Statistically significant reporting odds ratios were observed when comparing the reporting of hypersensitivity reactions for PEGylated versus non-PEGylated medicinal products (reporting odds ratio: 1.3; 95% confidence interval 1.1-1.4). However, when using all other drugs as comparators, the disproportionality analysis showed no association with hypersensitivity reactions for PEGylated nor non-PEGylated medicinal products, thus suggesting that many other triggers of drug-induced hypersensitivity reactions play a major role. CONCLUSIONS: The findings of this analysis of the Italian spontaneous adverse drug reaction database suggest a potential involvement for PEGylation in triggering drug-related hypersensitivity reactions, especially clinically relevant reactions. However, when comparing both PEGylated and non-PEGylated drugs under study to all other drugs no disproportionate reporting of hypersensitivity reactions was observed, probably due to a masking effect owing to the presence in the same database of other medicinal products increasing the threshold required to highlight a safety signal when the entire database is used as a reference.

Ultrasound-Assisted Extraction of Cannabinoids from Cannabis Sativa for Medicinal Purpose.

Over the past 20 years, the interest in Cannabis oily extracts for medicinal use compounded in pharmacy has consistently grown, along with the need to have preparations of adequate quality. Hot maceration (M) is the most frequently used method to compound oily solutions. In this work, we systematically studied the possibility of using an ultrasonic homogenizer and a sonotrode (US) as an alternative extraction method. Oily solutions were prepared using two available varieties of Cannabis for medicinal use, called FM2 and Bedrocan. All preparations resulted with an equivalent content in CBD and THC, with the advantage of a faster process using US. In particular, 10 min sonication at the amplitude optimized for the sonotrode used (2 or 7 mm) provides not statistically different total Δ9-tetrahydrocannabinol (M-FM2: 0.26 ± 0.02 % w/w; US-FM2: 0.19 ± 0.004 % w/w; M-Bedrocan: 1.83 ± 0.17 % w/w; US-Bedrocan: 1.98 ± 0.01 % w/w) and total cannabidiol (M-FM2: 0.59 ± 0.04 % w/w; US-FM2: 0.58 ± 0.01 % w/w) amounts extracted in refined olive oil. It can therefore be confirmed that sonotrode is an efficient and fast extraction technique and its use is without negative consequence on the solvent properties. Despite DSC evidencing that both maceration and sonication modify the Tonset and enthalpy of the event at about -10 °C, the qualitative characteristics of the oil remained constant for the two treatments and similar to the starting material.

Design of Liposomal Lidocaine/Cannabidiol Fixed Combinations for Local Neuropathic Pain Treatment.

The administration of drug fixed combinations by nanocarriers is a new attractive approach since it can allow improvements in both the skin penetration of cargo compounds and their synergistic effects. The cutaneous administration of lidocaine (LD) and cannabidiol (CBD) combination can be useful for the local treatment of neuropathic pain. In fact, these drugs might exert a complementary effect on pain acting on sodium and calcium channels. In this study, the feasibility to deliver this combination in the deeper layers of the skin using deformable liposomes was studied. Based on a study of the drug affinity for lipid components performed by DSC, CBD was loaded in the lipid bilayer for limiting the leakage, while LD was loaded in the inner core by a pH gradient method (G-liposomes) or after previous encapsulation in micelle (DiMiL). The effect of the presence of Tween 80 in the liposome membrane was also evaluated. DiMiL increased both the skin permeation and the retention in the dermis of CBD and LD with respect to G-liposomes (R24dermis: 11.52 ± 2.4 against 4.51 ± 0.8 µg/cm2 for CBD; 19.6 ± 2.9 against 3.2 ± 0.1 µg/cm2 for LD). Moreover, both DiMiL and G-liposomes were more efficient than control formulations carrying free drugs in improving drug skin permeation. Interestingly, in the presence of a drug exerting a fluidizing effect such as CBD, the removal of Tween 80 from the composition led to an improved control of drug release and a higher extent of drug retention in the dermis layer.

Medicinal products meet medical devices: Classification and nomenclature issues arising from their combined use.

When a medicinal product (MP) and a medical device (MD) are combined, their correct classification implies discrimination among different possible scenarios, based on the nature of the combination and the principal mechanism of action. In the European Union (EU), stakeholders deal with a lack of harmonization, which can represent an obstacle toward the development of these products, and a complex nomenclature, emerging from two divergent regulatory philosophies (i.e., that of MPs and that of MDs). In the USA, where the US Food and Drug Administration (FDA) supervises MDs, drugs, and biological products, stakeholders interact with a single authority, where any issue is addressed internally.

Extended-release calcifediol in stage 3-4 chronic kidney disease: a new therapy for the treatment of secondary hyperparathyroidism associated with hypovitaminosis D.

A high percentage of patients with chronic kidney disease have hypovitaminosis D, which is a driver of secondary hyperparathyroidism and an important factor in chronic kidney disease-mineral and bone disorder. Vitamin D deficiency (serum total 25-OH vitamin D levels < 30 ng/mL) occurs early in the course of chronic kidney disease and treatment guidelines recommend early intervention to restore 25-OH vitamin D levels as a first step to prevent/delay the onset/progression of secondary hyperparathyroidism. The vitamin D forms administered to replace 25-OH vitamin D include cholecalciferol, ergocalciferol, and immediate- or extended-release formulations of calcifediol. Most patients with intermediate-stage chronic kidney disease will develop secondary hyperparathyroidism before dialysis is required. Control of parathyroid hormone levels becomes a major focus of therapy in these patients. This article focuses on the position of extended-release calcifediol in the treatment of patients with stage 3-4 chronic kidney disease and secondary hyperparathyroidism with hypovitaminosis D. Several characteristics of extended-release calcifediol support its use in the intermediate stages of chronic kidney disease. The pharmacokinetics of extended-release calcifediol make it effective for replenishing 25-OH vitamin D levels, with minimal impact on vitamin D catabolism from fibroblast-growth factor-23 and CYP24A1 upregulation. Extended-release calcifediol increases circulating 25-OH vitamin D levels in a dose-dependent manner and lowers parathyroid hormone levels by a clinically relevant extent, comparable to what can be achieved by administering active vitamin D analogues, though with a lower risk of hypercalcaemia and hyperphosphataemia. Active vitamin D analogues are reserved for patients undergoing dialysis or pre-dialysis patients with severe progressive secondary hyperparathyroidism.

Medical Device Development for Children and Young People-Reviewing the Challenges and Opportunities.

Development of specific medical devices (MDs) is required to meet the healthcare needs of children and young people (CYP). In this context, MD development should address changes in growth and psychosocial maturation, physiology, and pathophysiology, and avoid inappropriate repurposing of adult technologies. Underpinning the development of MD for CYP is the need to ensure MD safety and effectiveness through pediatric MD-specific regulations. Contrary to current perceptions of limited market potential, the global pediatric healthcare market is expected to generate around USD 15,984 million by 2025. There are 1.8 billion young people in the world today; 40% of the global population is under 24, creating significant future healthcare market opportunities. This review highlights a number of technology areas that have led to successful pediatric MD, including 3D printing, advanced materials, drug delivery, and diagnostic imaging. To ensure the targeted development of MD for CYP, collaboration across multiple professional disciplines is required, facilitated by a platform to foster collaboration and drive innovation. The European Pediatric Translational Research Infrastructure (EPTRI) will be established as the European platform to support collaboration, including the life sciences industrial sector, to identify unmet needs in child health and support the development, adoption, and commercialization of pediatric MDs.

Critical Aspects in the Preparation of Extemporaneous Flecainide Acetate Oral Solution for Paediatrics.

The availability of liquid oral preparations compounded by pharmacists is essential to meet paediatric needs which remain unanswered by the pharmaceutical industry. Unfortunately, compendial monographs are often not available and, in many cases, pre-formulation studies (e.g., compatibility with other excipients and solubility evaluations) are not performed in-depth, leading, in some rare cases, to the inadvertent administration of a toxic dose. In this study, the preparation of an oral liquid formulation for paediatric use, containing flecainide acetate at different strengths, was considered, taking into account the possible effects of conventionally used excipients. First, the optimal vehicle was selected based on a solubility study, evidencing some unexpected formations of precipitates. As a matter of fact, the buffers commonly used for oral solutions significantly reduced flecainide solubility, and the concomitant presence of citrate buffer and methylparaben even caused the formation of non-resuspendable crystals. Then, chemical, physical, and microbiological stability were assessed. Solutions at strengths of 10 and 20 mg/mL flecainide acetate were stable up to 8 weeks when compounded by using a 40% sucrose solution as a vehicle. Microbiological data showed that the use of methylparaben was not necessary over this time period.

Stability of high concentrated triple intrathecal therapy for pediatrics and mitigation strategies.

Stringent formulation requirements are defined to intrathecally administer drug substances, avoiding neurological complications. In case of pediatric patients, these are further complicated due to the limited volumes of the celebrospinal fluid and, therefore, high concentrated solutions of methotrexate (MTX), cytarabine and corticosteroids (i.e., methylprednisolone or hydrocortisone) are prepared based on the patient's age. This work aims to assess the chemical and physical stability of triple intrathecal mixtures differing in volume and composition by a bracketing approach and to identify possible stress causes and mitigation strategies. Low solubility of MTX was the main factor limiting the physical stability of triple mixtures. Regarding solutions containing methylprednisolone, the amount of MTX remaining was about 95% in the solution at highest concentrations with the concomitant formation of a visible particulate sizing bigger than 1 µm after 24 h of storage at 25 °C. This behavior was mainly driven by the pH reduction due to the pH value of the cytarabine solution used; the shear stress also induced drug precipitation. In the case of the hydrocortisone based mixtures, the precipitate formation occurred at a slow rate. To improve the physical stability, a better control of the mixture pH (optimal value ≈ 7) is required or, as an alternative, the addition of the cytarabine solution to a pre-mixed binary mixture containing MTX and a corticosteroid should be preferred.

Pre-Drawn Syringes of Comirnaty for an Efficient COVID-19 Mass Vaccination: Demonstration of Stability.

Moving towards a real mass vaccination in the context of COVID-19, healthcare professionals are required to face some criticisms due to limited data on the stability of a mRNA-based vaccine (Pfizer-BioNTech COVID-19 Vaccine in the US or Comirnaty in EU) as a dose in a 1 mL-syringe. The stability of the lipid nanoparticles and the encapsulated mRNA was evaluated in a "real-life" scenario. Specifically, we investigated the effects of different storing materials (e.g., syringes vs. glass vials), as well as of temperature and mechanical stress on nucleic acid integrity, number, and particle size distribution of lipid nanoparticles. After 5 h in the syringe, lipid nanoparticles maintained the regular round shape, and the hydrodynamic diameter ranged between 80 and 100 nm with a relatively narrow polydispersity (<0.2). Samples were stable independently of syringe materials and storage conditions. Only strong mechanical stress (e.g., shaking) caused massive aggregation of lipid nanoparticles and mRNA degradation. These proof-of-concept experiments support the hypothesis that vaccine doses can be safely prepared in a dedicated area using an aseptic technique and transferred without affecting their stability.

Relevance of production method on the physical stability and in vitro biopharmaceutical performances of olanzapine orodispersible film.

This study assessed the relevance of the preparation process, namely solvent casting and hot-melt ram printing, on the biopharmaceutical performances of olanzapine orodispersible films (ODF) made of maltodextrins. Beside the clinical rationale, olanzapine was selected since it is subjected to polymorphism which impacts on its bioavailability. All ODF disintegrated in less than 3 min and showed content uniformity within the acceptable values. Dissolution testing in 3 mL of artificial saliva at pH = 6.8 evidenced that cast and printed ODF released after 5 min about 2% and 100%, respectively; at higher volume, a yellow precipitate was formed after disintegration of the cast ODF. At pH = 1.2, the t85% for cast ODF was reached after about 20 min and only the 90% olanzapine was dissolved increasing the pH to 6.8. These differences were explained by DSC, TGA and X-ray diffraction data which demonstrated that the casting method, which included the preparation of an aqueous slurry, favours the conversion from Form I to a hydrated one. Since extruded ODF resulted physically stable after 30 months, this suggests the potentiality of this technique to load in ODF drugs undergoing solid-state modification after exposure to aqueous media.

Optical Measurements of Sweat for in Vivo Quantification of CFTR Function in Individual Sweat Glands.

Optical measurement of CFTR-dependent sweat secretion stimulated by a beta-adrenergic cocktail (C-phase) vs. CFTR-independent sweat secretion induced by methacholine (M-phase) can discriminate cystic fibrosis (CF) patientts from controls and healthy carriers by the ratio of sweat rate in the C-phase vs. the M-phase (C/M ratio). However, image analysis is experimentally demanding and time-consuming. Here, sweat droplet number (SDN) in the C-phase, corresponding to the number of sweat-secreting glands, was a statistically significant predictor for detecting the effects of CFTR-targeted therapy. We show that in 44 non-CF subjects and 110 CF patients, SDN in the C-phase provides a linear readout of CFTR function that is more sensitive than that using the C/M ratio. In CF patients, increased SDN in the C-phase during treatment with (LUMA/IVA) was associated with a trend toward improved lung function (FEV1). Our method is suitable for multicenter monitoring of the effects of CFTR modulators.

Extemporaneous printing of diclofenac orodispersible films for pediatrics.

OBJECTIVE: The possible application of a hot-melt ram extrusion printing to the preparation of diclofenac orodispersible films (ODF) made of maltodextrin was studied focusing the attention on the effects of taste-masking agents (i.e. namely mint, licorice-mint, and sucralose) and an opacifier (titanium dioxide [TiO2]). SIGNIFICANCE: This is a proof-of-concept of the feasibility to print ODF loaded with a thermosensitive drug substance by hot-melt technologies. METHODS: Diclofenac sodium (DNa) ODF made of maltodextrin (dextrose equivalent (DE) = 6 ) plasticized with glycerol were prepared by hot-melt extrusion printing. ODF were characterized for disintegration time, drug content, and solid state, in vitro dissolution in deionized water and simulated salivary fluid at pH 5.7, tensile, and adhesive properties. Moreover, the stability of ODF was assessed in accelerated conditions over six months. RESULTS: After the preparation, no variation in drug solid state was evident and the formation of impurity A of DNa was detected, even if it remained below the Pharmacopoeia (Ph. Eur.) limits (< 0.2%). Only the addition of DNa significantly improved the ODF tensile properties: the tensile strength increased from 0.17 ± 0.03 MPa (placebo ODF) to 2.21 ± 0.54 MPa (p ≤ 0.03). All ODF disintegrated in about 1 min, and the t80% was lower than 3 min. TiO2 reduced the static and dynamic peel forces (p ≤ 0.006) favoring the ODF detachment from the primary packaging material. During the accelerated stability study, ODF were easy to handle without fracture; the drug content, impurity A, and dissolution profiles remained superimposable. CONCLUSION: Hot-melt printing can be suitable to prepare palatable ODF loaded with bitter thermosensitive drugs.

Spectrophotometry and pharmaceutical PAT/RTRT: Practical challenges and regulatory landscape from development to product lifecycle.

European Pharmacopoeia includes dedicated chapters for Raman, NIR and Chemometrics, as well as there is a lot of Academia research on the matter. Despite that, the word innovation is often associated to such tools and there is a still slow implementation at industry. The paper is the outcome of the Associazione Farmaceutici dell'Industria (AFI) Study Group on Process Innovation and Product Lifecycle; the aim is to describe some case studies referring to practical approaches in pharmaceutical industry, in order to depict challenges and opportunities for the implementation of spectroscopic techniques. Case studies include: feasibility and pre-screening evaluations, chemometric model development approaches, way for the method maintenance during commercial manufacturing, challenges for implementation on existing equipment and on sterile processes. Case studies refer to oral solid products, liquid products and sterile Active Pharmaceutical Ingradient (API) manufacturing. There are already successful and robust spectroscopic applications in pharmaceutical industry and the technology is mature: this is the outcome of a strong applied research performed at pharmaceutical production departments. It is necessary to acknowledge efforts done by industry as Research for strengthening the cooperation with Academia, so that advantage of process innovation might reach the patients in a fastest way.

Considerations on D-mannose Mechanism of Action and Consequent Classification of Marketed Healthcare Products.

Urinary tract infections (UTIs) are very common disorders that affect adult women. Indeed, 50% of all women suffer from UTIs at least one time in their lifetime; 20-40% of them experience recurrent episodes. The majority of UTIs seems to be due to uropathogenic Escherichia coli that invades urothelial cells and forms quiescent bacterial reservoirs. Recurrences of UTIs are often treated with non-prescribed antibiotics by the patients, with increased issues connected to antibiotics resistance. D-mannose, a monosaccharide that is absorbed but not metabolized by the human body, has been proposed as an alternative approach for managing UTIs since it can inhibit the bacterial adhesion to the urothelium. This manuscript discusses the mechanisms through which D-mannose acts to highlight the regulatory aspects relevant for determining the administrative category of healthcare products placed on the market. The existing literature permits to conclude that the anti-adhesive effect of D-mannose cannot be considered as a pharmacological effect and, therefore, D-mannose-based products should be classified as medical devices composed of substances.